SRX 2004-2005

Crankshaft Front Seal

Print

Removal & Installation




NOTE
This procedure requires the use of an oil seal installer, special tool J29184 or equivalent.

  1. Remove the A/C compressor and power steering pump drive belt.
  2.  
  3. Remove the generator and water pump drive belt.
  4.  
  5. Remove the crankshaft balancer.
  6.  
  7. Use a flat-bladed tool in order to remove the crankshaft oil seal.
  8.  

To install:


NOTE
Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces.

  1. Use the J29184 or equivalent to install the crankshaft front oil seal.

    Click image to see an enlarged view

    Fig. Installing front crankshaft seal-3.6L engine

  2.  
  3. Install the crankshaft balancer.
  4.  
  5. Install the generator and water pump drive belt.
  6.  
  7. Install the A/C compressor and power steering pump drive belt.
  8.  


NOTE
This procedure requires the use of an oil seal installer, special tool J29184 or equivalent.

  1. Remove the A/C compressor and power steering pump drive belt.
  2.  
  3. Remove the generator and water pump drive belt.
  4.  
  5. Remove the crankshaft balancer.
  6.  
  7. Use a flat-bladed tool in order to remove the crankshaft oil seal.
  8.  

To install:


NOTE
Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces.

  1. Use the J29184 or equivalent to install the crankshaft front oil seal.

    Click image to see an enlarged view

    Fig. Installing front crankshaft seal-3.6L engine

  2.  
  3. Install the crankshaft balancer.
  4.  
  5. Install the generator and water pump drive belt.
  6.  
  7. Install the A/C compressor and power steering pump drive belt.
  8.  

 
label.common.footer.alt.autozoneLogo