SRX 2004-2005

Output Shaft Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the right front wheel.
  6.  
  7. Remove the right halfshaft.
  8.  
  9. Pry the output shaft seal from the seal opening.

    Click image to see an enlarged view

    Fig. Using the Seal installer tool (1) to install the output shaft seal (2).

  10.  

To install:

  1. Lubricate the seal surface with synthetic gear oil.
  2.  
  3. Using a seal installer, install the new seal.
  4.  
  5. Install the right halfshaft.
  6.  
  7. Install the right wheel.
  8.  
  9. Lower the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo