SRX 2004-2005

Maintenance Intervals

Print

MAINTENANCE I AND II SERVICE SCHEDULES
Cadillac SRX
ServiceMaintenance IMaintenance II
Change the engine oil and filter.XX
Reset the oil life system.    
Visually inspect the vehicle for leaks or damage. A fluid loss in the vehicle system could indicate a problem. Inspected, repair and add fluid to the system if necessary.XX
Inspect the engine air cleaner filter. If necessary, replace the filter.XX
Inspect the engine air cleaner filter. If necessary, replace the filter.XX
  XX
Rotate the tires. Inspect the tire inflation pressures and the tire wear.XX
  XX
  XX
Visually inspect the brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect the disc brake pads for wear and the rotors for surface condition. Inspect the drum brake linings for wear or cracks. Inspect other brake partsXX
Inspect the engine coolant and the windshield washer fluid levels. Add fluid as needed.XX
Inspect the suspension and steering components. Inspect the front and rear suspension and the steering system for damaged, loose or missing parts, or signs of wear. Inspect the power steering lines and the hoses for proper hook-up, binding, leaks, crac--X
  --X
    X
Visually inspect the coolant hoses and replace the hoses if they are cracked, swollen or deteriorated. Inspect all pipes, fittings and clamps; replace with GM parts as needed. To help ensure proper operation, a pressure test of the cooling system and p   X
Inspect the wiper blades.--X
Inspect the wiper blades for wear or cracking.    
Inspect the restraint system components.--X
Ensure the safety belt reminder light and all the belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from    
Lubricate the body components.--X
Lubricate all key lock cylinders, hood latch assemblies, secondary latches, pivots, spring anchor and release pawl, hood and door hinges, rear folding seats and liftgate hinges. Frequent lubrication may be required when exposed to a corrosive environme    
Inspect the transaxle fluid level and add fluid as needed.--X
Inspect the suspension and steering components.--X
    X
Inspect the front and rear suspension and the steering system for damaged, loose or missing parts, or signs of wear. Inspect power steering lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc.   X
Inspect the throttle system.--X
    X
Inspect the throttle system for interference or binding and for damaged or missing parts. Replace the parts as needed. Replace any components that have high effort or excessive wear. Do not lubricate the accelerator or the cruise control cables.   X
Replace the passenger compartment air filter.--X
    X
Replace the passenger compartment air filter.   X
1Press the CLR button located to the right of the DIC display to acknowledge the Change Engine Oil message.
21. Press the up or down arrow on the INFO button located to the right of the DIC display to access the DIC menu.
32. Once XXX% ENGINE OIL LIFE menu item is highlighted, press and hold the CLR button.
4
5When the CHANGE ENGINE OIL light appears, certain services and inspections are required.
6Required services are described as MaintenanceI and MaintenanceII.
7Alternate between the 2thereafter. However, in some cases, MaintenanceII may be required more often.
8MaintenanceI:Use MaintenanceI if the CHANGE ENGINE OIL light comes on within 10months since
9vehicle was purchased or, if Maintenance II was performed.
10MaintenanceII:Use MaintenanceII if the previous service performed was MaintenanceI. Always use
11Maintenance I whenever the CHANGE ENGINE OIL light comes on 10 months or more since the last service, or, if
12the CHANGE ENGINE OIL light has notcome on at all for one year.
MAINTENANCE I AND II SERVICE SCHEDULES
srx
ServiceMaintenance IMaintenance II
Change the engine oil and filter. Reset the oil life system.XX
Visually inspect the vehicle for leaks or damage. A fluid loss in the vehicle system could indicate a problem. Inspected, repair and add fluid to the system if necessary.XX
Inspect the engine air cleaner filter. If necessary, replace the filter.XX
Rotate the tires. Inspect the tire inflation pressures and the tire wear.XX
Visually inspect the brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect the disc brake pads for wear and the rotors for surface condition. Inspect the drum brake linings for wear or cracks. Inspect other brake parts, including drums, wheel cylinders, calipers, parking brake, etc. Inspect the parking brake adjustment.XX
Inspect the engine coolant and the windshield washer fluid levels. Add fluid as needed.XX
Inspect the suspension and steering components. Inspect the front and rear suspension and the steering system for damaged, loose or missing parts, or signs of wear. Inspect the power steering lines and the hoses for proper hook-up, binding, leaks, cracks, chafing, etc.   X
Visually inspect the coolant hoses and replace the hoses if they are cracked, swollen or deteriorated. Inspect all pipes, fittings and clamps; replace with GM parts as needed. To help ensure proper operation, a pressure test of the cooling system and pressure cap and cleaning the outside of the radiator and air conditioning condenser is recommended at least once a year.   X
Inspect the wiper blades for wear or cracking.   X
Inspect the restraint system components.Ensure the safety belt reminder light and all the belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from working correctly, repair or replaced the damaged part. Replace torn or frayed safety belts, refer to Operational and Functional Checks in Seat Belts. Inspect for any opened or broken air bag coverings, and repair or replace as needed. The air bag system does require regular maintenance.   X
Lubricate the body components.Lubricate all key lock cylinders, hood latch assemblies, secondary latches, pivots, spring anchor and release pawl, hood and door hinges, rear folding seats and liftgate hinges. Frequent lubrication may be required when exposed to a corrosive environment, refer to Fluid and Lubricant Recommendations.Applying dielectric silicone grease GM P/N 12345579 (Canadian P/N 1974984) or equivalent on the weatherstrips with a clean cloth.   X
Inspect the transaxle fluid level and add fluid as needed.   X
Inspect the suspension and steering components.Inspect the front and rear suspension and the steering system for damaged, loose or missing parts, or signs of wear. Inspect power steering lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc.   X
Inspect the throttle system for interference or binding and for damaged or missing parts. Replace the parts as needed. Replace any components that have high effort or excessive wear. Do not lubricate the accelerator or the cruise control cables.   X
Replace the passenger compartment air filter.   X
1When the CHANGE ENGINE OIL light appears, certain services and inspections are required.
2Press the CLR button located to the right of the DIC display to acknowledge the Change Engine Oil message.

Additional Maintenance Services



ADDITIONAL MAINTENANCE SERVICES
Cadillac SRX
To be servicedType of serviceVehicle mileage interval (x1000)
    255075100125150
Air cleaner filterR   X   X   X
Accessory drive beltI           X
Auto. Trans. Fluid and FilterAR   X   X   X
Cooling system hoses and clampsS/I           X
Engine coolantR           X
Fuel systemIXXXXXX
Exhaust system & heat shieldsS/IXXXXXX
Supercharger oil levelS/IXXXXXX
Spark plugs and wiresR       X    
1R: Replace S/I: Inspect and service, if necessary
2- Replace if any of the following conditions are met:
3Heavy city traffic where the outside temperature regularly reaches 32C (90F) or higher
ADDITIONAL MAINTENANCE SERVICES
srx
To be servicedType of serviceVehicle mileage interval (x1000)
    255075100125150
Air cleaner filterR   X   X   X
Accessory drive beltI           X
Auto. Trans. Fluid and Filter -R   X   X   X
Cooling system hoses and clampsS/I           X
Engine coolantR           X
Fuel systemIXXXXXX
Exhaust system & heat shieldsS/IXXXXXX
Supercharger oil levelS/IXXXXXX
Spark plugs and wiresR       X    
1R: Replace S/I: Inspect and service, if necessary
2- Replace if any of the following conditions are met:
 
label.common.footer.alt.autozoneLogo