SRX 2004-2005

Removal & Installation

Print

3.6L Engine



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belt
     

  6.  
  7. Use Special Tool EN-46104 to retain the water pump pulley

    Click image to see an enlarged view

    Fig. Using water pump pulley holding tool EN-46104 to remove the pulley bolts.

  8.  
  9. Remove or disconnect the following:

    Water pump pulley
     
    Water pump
     

  10.  

To install:


NOTE
Clean the water pump sealing surfaces

  1. Install the water pump and new gasket. Tighten the bolts to 89 inch lbs. (10 Nm).
  2.  
  3. Install the water pump pulley.
  4.  
  5. Use Special Tool EN-46104 to retain the water pump pulley. Tighten the water pump pulley bolts to 106 inch lbs. (12 Nm).
  6.  
  7. Install or connect the following:

    Accessory drive belt
     
    Negative battery cable
     

  8.  
  9. Fill the cooling system to the correct level.
  10.  
  11. Start the engine and check for leaks.
  12.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belt
     

  6.  
  7. Use Special Tool EN-46104 to retain the water pump pulley

    Click image to see an enlarged view

    Fig. Using water pump pulley holding tool EN-46104 to remove the pulley bolts.

  8.  
  9. Remove or disconnect the following:

    Water pump pulley
     
    Water pump
     

  10.  

To install:


NOTE
Clean the water pump sealing surfaces

  1. Install the water pump and new gasket. Tighten the bolts to 89 inch lbs. (10 Nm).
  2.  
  3. Install the water pump pulley.
  4.  
  5. Use Special Tool EN-46104 to retain the water pump pulley. Tighten the water pump pulley bolts to 106 inch lbs. (12 Nm).
  6.  
  7. Install or connect the following:

    Accessory drive belt
     
    Negative battery cable
     

  8.  
  9. Fill the cooling system to the correct level.
  10.  
  11. Start the engine and check for leaks.
  12.  

4.6L Engine



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Cooling fan
     
    Water pump drive belt
     
    Drive belt tensioner
     
    Water pump pulley
     
    Water pump mounting bolts
     
    Water pump
     

  6.  

To install:

  1. Install or connect the following:

    Water pump and new gasket. Tighten the bolts to 89 inch lbs. (10 Nm).
     
    Water pump pulley. Tighten the bolts to 106 inch lbs. (12 Nm).
     
    Drive belt tensioner
     
    Water pump drive belt
     
    Cooling fan
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system to the correct level.
  4.  
  5. Start the engine and check for leaks.
  6.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Cooling fan
     
    Water pump drive belt
     
    Drive belt tensioner
     
    Water pump pulley
     
    Water pump mounting bolts
     
    Water pump
     

  6.  

To install:

  1. Install or connect the following:

    Water pump and new gasket. Tighten the bolts to 89 inch lbs. (10 Nm).
     
    Water pump pulley. Tighten the bolts to 106 inch lbs. (12 Nm).
     
    Drive belt tensioner
     
    Water pump drive belt
     
    Cooling fan
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system to the correct level.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo