Saab 2000-06

Removal & Installation

Print



Click image to see an enlarged view

Fig. Removing glove box (1) and air duct (2)

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the glove box.
  6.  
  7. Remove the air duct.

    Click image to see an enlarged view

    Fig. Removing blower motor and components

  8.  
  9. Unplug the electric connector (3).
  10.  
  11. Remove the blower motor (4) from the climate control unit housing by unhooking the locking tongues.
  12.  
  13. Disconnect the motor shaft (5) from the wire. The wire is angled at the end and locked by a clip. Use pliers to turn the clip so that the wire can be removed.
  14.  
  15. Lift out the blower motor.
  16.  
  17. To install, reverse removal procedure.
  18.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the glove box.
  6.  
  7. The blower motor is located on the fan housing's outer end.

    Click image to see an enlarged view

    Fig. Disconnecting electrical connector (2) and removing blower motor (3)

  8.  
  9. Disconnect the blower motor connector by pressing in the lock and pulling out the connector.
  10.  
  11. Dismantle the blower motor.
  12.  
  13. To install, reverse removal procedure.
  14.  



Click image to see an enlarged view

Fig. Locating and removing blower motor

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the glove box.
  6.  
  7. Remove the blower motor and 2 bolts.
  8.  
  9. Unplug the connector.
  10.  
  11. To install, reverse removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo