Saab 2000-06

Oil Pressure Sensor

Print

Removal & Installation





Click image to see an enlarged view

Fig. Locating and removing oil pressure sensor

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Safely raise the vehicle and remove lower engine cover.
  4.  
  5. Unplug the sensor connector.
  6.  
  7. Place a drain pan under the vehicle and remove the oil pressure sensor.
  8.  
  9. To install, use a new gasket and install sensor. Tighten to: 22 ft. lbs. (30 Nm).
  10.  
  11. Connect the electrical connector and install the lower engine cover and lower the vehicle.
  12.  
  13. Check the oil level and top off as necessary.
  14.  

 
label.common.footer.alt.autozoneLogo