Saab 2000-06

Ignition Lock Cylinder

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the transponder (1).

    Click image to see an enlarged view

    Fig. Removing ignition lock cylinder (2002 shown)

  6.  
  7. Turn the ignition switch to the OFF position.
  8.  
  9. Bend a welding rod (3) or equivalent, remove the lock cylinder (4) by pressing in the catch with the welding rod and withdrawing the cylinder straight up.
  10.  
  11. To install, insert lock cylinder and press it firmly all the way in. Make sure it is firmly located.
  12.  
  13. Install the transponder.
  14.  

 
label.common.footer.alt.autozoneLogo