Saab 2000-06

Brake Disc (Rotor)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the wheels.
  4.  
  5. Remove the brake caliper.
  6.  
  7. Remove the brake disc locking screw/bolt and remove brake disc.
  8.  

To install:

  1. Clean the new brake disc.
  2.  
  3. Clean all the contact surfaces between the hub and the brake disc.
  4.  
  5. Install the brake disc on the hub and tighten to: 5 ft. lbs. (7 Nm).
  6.  
  7. Install brake caliper and wheels.
  8.  
  9. Lower the car and press the brake pedal to press out the brake pads.
  10.  
  11. Test drive the car and check the operation of the brakes.
  12.  

 
label.common.footer.alt.autozoneLogo