Santa Fe, Vera Cruz 2006-2008

Control Panel

Print

Removal & Installation



Specific to:

Hyundai Santa Fe 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the rear side trim.
  6.  
  7. Loosen the mounting screw and remove the rear blower controller from the rear side trim.

    Click image to see an enlarged view

    Fig. Remove the rear blower controller from the rear side trim

  8.  
  9. Loosen the mounting screw and then remove the rear blower control unit (A) from the air vent (B).

    Click image to see an enlarged view

    Fig. Remove the rear blower control unit (A) from the air vent (B)

  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

Specific to:

Hyundai Veracruz 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the center console armrest box (A).

    Click image to see an enlarged view

    Fig. Remove the center console armrest box (A)

  6.  
  7. Remove the screw and remove the armrest (B).

    Click image to see an enlarged view

    Fig. Remove the screw and remove the armrest (B)

  8.  
  9. Remove the rear cup holder (A).

    Click image to see an enlarged view

    Fig. Remove the rear cup holder (A)

  10.  
  11. Remove the console rear cover (A).

    Click image to see an enlarged view

    Fig. Remove the console rear cover (A)

  12.  
  13. Remove the rear blower and A/C controller (A) after loosening the screw from the console rear cover.

    Click image to see an enlarged view

    Fig. Remove the rear blower and A/C controller (A) after loosening the screw from the console rear cover

  14.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo