Santa Fe, Vera Cruz 2006-2008

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the front console cover by removing the screw and detaching the clips.
  6.  
  7. Disconnect the following items to remove the center fascia panel (A).

    Hazard warning lamp connector (B)
     
    Rear defroster connector (D)
     
    Windshield deicer connector (C)
     
    Front fog lamp connector (E)

    Click image to see an enlarged view

    Fig. Control panel connectors diagram

     

  8.  
  9. Remove the audio assembly.
  10.  
  11. Loosen the screws.
  12.  
  13. Remove the heater control unit (A).

    Click image to see an enlarged view

    Fig. Heater control unit diagram

  14.  

To install:

  1. Installation is the reverse of the removal procedure.
    NOTE
    Make sure all the connectors are plugged in properly.

  2.  

 
label.common.footer.alt.autozoneLogo