Santa Fe, Vera Cruz 2006-2008

Sunroof

Print

Power Sunroof



Diagnosis & Testing
Motor

Specific to:

Hyundai Santa Fe 2006-2008

Hyundai Veracruz 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the sunroof motor (A).
  6.  
  7. Disconnect the electrical connections.
  8.  
  9. Ground the terminals as below table, and check that the sunroof unit operates as described.

    Click image to see an enlarged view

    Fig. Remove the sunroof motor (A)

  10.  
  11. Ground the terminals as below table, and check that the sunroof unit operates accordingly.

    Click image to see an enlarged view

    Fig. Check that the sunroof unit operates according to diagram

  12.  
  13. Apply battery voltage to terminals 3 and 6, and a ground to terminal 1.
  14.  
  15. Use the Terminal Test Condition Table to perform input tests at the sunroof motor connector.
    1. If any test indicates a problem, find and correct the cause, then recheck the system.
    2.  
    3. If all the input tests prove OK, the sunroof motor must be faulty; replace it.

      Click image to see an enlarged view

      Fig. Terminal test condition table

    4.  

  16.  

Switch

Specific to:

Hyundai Santa Fe 2006-2008

Hyundai Veracruz 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Open the sunglass case cover from the overhead console.
  6.  
  7. Remove the 2 screws holding the overhead console.
  8.  
  9. Disconnect the electrical connector, then remove the overhead console lamp assembly from the headliner.
  10.  
  11. Check for continuity between the terminals as shown in the table. If the continuity is not as specified, replace the sunroof switch.

    Click image to see an enlarged view

    Fig. Sunroof switch connector end view-Santa Fe



    Click image to see an enlarged view

    Fig. Sunroof switch connector end view-Veracruz



    Click image to see an enlarged view

    Fig. Continuity table for testing the sunroof switch-Santa Fe



    Click image to see an enlarged view

    Fig. Continuity table for testing the sunroof switch-Veracruz

  12.  

Removal & Installation


Click image to see an enlarged view

Fig. Sunroof assembly components



Click image to see an enlarged view

Fig. Sunroof component locations

Motor

Specific to:

Hyundai Santa Fe 2006-2008

Hyundai Veracruz 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the overhead console.
  6.  
  7. Remove the 3 sun roof motor mounting screws.
  8.  
  9. Disconnect the 10P electrical connector from the sunroof motor.
  10.  
  11. Remove the sunroof motor (A).
  12.  
  13. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Remove the sunroof motor (A)

  14.  

Switch

Specific to:

Hyundai Santa Fe 2006-2008

Hyundai Veracruz 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Open the sunglass case cover from the overhead console.
  6.  
  7. Remove the 2 screws holding the overhead console.
  8.  
  9. Disconnect the switch connector (4P).
  10.  
  11. Disconnect the map lamp connector-Santa Fe (2P); Veracruz (6P).
  12.  
  13. Remove the overhead console lamp and sunroof switch.
  14.  
  15. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Remove the 2 screws holding the overhead console

  16.  

 
label.common.footer.alt.autozoneLogo