Santa Fe, Vera Cruz 2006-2008

Brake Calipers

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Brake hose from the caliper
     
    Caliper mounting bolts
     
    Caliper
     

  4.  

To install:

  1. Install or connect the following:

    Caliper
     
    Caliper mounting bolts and tighten to 58-73 ft. lbs. (80-100 Nm)
     
    Brake hose to the caliper and tighten the fitting to 18-22 ft. lbs. (25-30 Nm)
     
    Wheel
     

  2.  
  3. Bleed the brake system.
  4.  
  5. Before attempting to move the vehicle, pump the brake pedal to seat the pads against the rotors. Make sure the vehicle has a firm brake pedal. Check the level of the brake fluid and add fluid if necessary.
  6.  

 
label.common.footer.alt.autozoneLogo