Santa Fe, Vera Cruz 2006-2008

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:
    WARNING
    To prevent damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper from the undercarriage.



    Wheel
     
    Caliper mounting bolts
     
    Caliper and support it to one side with a wire
     
    Pads and shims
     

  4.  

To install:

  1. Install the pads, clips, and shims.
  2.  
  3. Bottom the caliper piston using tool 09581-11000 or a C-clamp.
  4.  
  5. Install the caliper mounting bolts and tighten to 58-73 ft. lbs. (80-100 Nm).
  6.  
  7. Install the wheel.
  8.  

 
label.common.footer.alt.autozoneLogo