Santa Fe, Vera Cruz 2006-2008

Multi-Function (Combination) Switch

Print

The turn signal switch is an integral component of the multi-function switch. Refer to Multi-Function Switch, removal & installation.

Removal & Installataion



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the steering wheel. Refer to Steering Wheel, removal & installation.
  4.  
  5. Remove the steering column upper (A) and lower shrouds (B).

    Click image to see an enlarged view

    Fig. Steering column shrouds

  6.  
  7. Remove the bolts (A) and remove the lower crash pad (B).

    Click image to see an enlarged view

    Fig. Lower crash pad

  8.  
  9. Remove the connectors of the multifunction switch (A).

    Click image to see an enlarged view

    Fig. Multifunction switch connectors

  10.  
  11. After removing bolts (A), remove the multifunction switch assembly (B).

    Click image to see an enlarged view

    Fig. After removing bolts (A), remove the multifunction switch assembly (B)

  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo