Santa Fe, Vera Cruz 2006-2008

Shock Absorbers

Print

Removal & Installation



Specific to:

Hyundai Santa Fe 2006-2008

Hyundai Veracruz 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Support the vehicle under the lower control arm.
  4.  
  5. Remove or disconnect the following:

    Rear wheel
     
    Upper shock absorber upper nut
     
    Lower shock absorber nut
     
    Shock absorber
     

  6.  

To install:

  1. Install the shock absorber. Tighten the upper nut to 15-22 ft. lbs. (20-30 Nm). Tighten the lower nut to 88-103 ft. lbs. (120-140 Nm).
  2.  
  3. Install the rear wheel.
  4.  

Testing & Inspection



Specific to:

Hyundai Santa Fe 2006-2008

Hyundai Veracruz 2007-2008

  1. Check the rubber parts for damage or deterioration.
  2.  
  3. Check for correct height and proper return of shock absorber to original height.
  4.  
  5. Check the shock absorber for abnormal resistance or unusual sounds.
  6.  
  7. Check for oil leakage around seals.
  8.  
  9. Replace as necessary.
  10.  

 
label.common.footer.alt.autozoneLogo