Santa Fe, Vera Cruz 2006-2008

Removal & Installation

Print

The recirculation door (also called the intake actuator) is located on the blower unit. It regulates the intake door through a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the glove box.
  6.  
  7. Disconnect the intake actuator connector.
  8.  
  9. Loosen the mounting screws and remove the intake actuator (A) from the blower unit.

    Click image to see an enlarged view

    Fig. Remove the intake actuator (A) from the blower unit

  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo