Saturn Coupes/Sedans/Wagons 1991-1998 Repair Guide

ABS System Enable Relay

Print

REMOVAL & INSTALLATION



The enable relay is located under the dashboard, above the steering column, taped to the wiring harness on 1991-94 Saturn models. On 1995-98 Saturn models, the enable relay is located in the underhood junction block.

  1. Disconnect the negative battery cable.
  2.  
  3. On 1991-94 models, remove the enable relay from under the dashboard, above the steering column.
  4.  
  5. On 1995-98 models, remove the underhood junction block cover, located on the left side of the engine compartment. Remove the relay.
  6.  
  7. Installation is the reverse of removal.
  8.  

 
label.common.footer.alt.autozoneLogo