Saturn Coupes/Sedans/Wagons 1991-1998 Repair Guide

Quick-Connect Fitting

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

  1. Disengage the quick-connect fitting by compressing the two plastic tabs together and pulling on the fuel line. If necessary, discard the plastic retainer.
  2.  

To aid in the disengagement procedure, it may be necessary to spray the quick-connect fitting with penetrating oil to remove any debris.

To install:
  1. Lubricate the steel male fuel line end with clean engine oil.
  2.  
  3. Install the new plastic retainer and firmly push the female connection onto the male end until a click is heard. Pull back on the line to confirm a positive engagement.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Compress the two plastic tabs while pulling on the fuel line



Click image to see an enlarged view

Fig. Fig. 2: Firmly push the female connection onto the male end until a click is heard

 
label.common.footer.alt.autozoneLogo