Saturn Coupes/Sedans/Wagons 1991-1998 Repair Guide

Liftgate Lock

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Remove the liftgate lower inner trim panel assembly. Refer to the procedure earlier in this section.
  2.  
  3. Disconnect the cable end from the lock cylinder housing.
  4.  
  5. Remove the lock cylinder retaining clip from inside the liftgate panel, then remove the lock cylinder.
  6.  

To install:
  1. Position the lock cylinder into the liftgate outer panel, then install the retaining clip.
  2.  
  3. Connect the latch lock cable to the cylinder housing.
  4.  
  5. Install the liftgate lower inner trim panel.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Disconnect the cable end from the liftgate lock cylinder housing

 
label.common.footer.alt.autozoneLogo