Saturn Coupes/Sedans/Wagons 1991-1998 Repair Guide

Back-up Light Switch

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. For easier access, it may be necessary to remove the air cleaner and intake tube assembly.
  4.  
  5. Unplug the switch electrical connector.
  6.  
  7. Loosen the switch and remove it from the transaxle shift housing.
  8.  
  9. Installation is the reverse of removal. However, before installing, apply a light coating of Teflon® sealant, P/N 21485278 or equivalent, to the threads of the switch.
  10.  
  11. Tighten the switch to 28 ft. lbs. (38 Nm).
  12.  



Click image to see an enlarged view

Fig. Fig. 1: Loosen the switch and remove it from the transaxle shift housing

 
label.common.footer.alt.autozoneLogo