Scion 2005-06

Driven Disc & Pressure Plate

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Transaxle
     
    Release fork and boot
     
    Release bearing assembly
     
    Release fork support
     

  4.  
  5. Matchmark the clutch cover and flywheel. Loosen the clutch cover bolts one turn at a time until the spring tension is released.
  6.  
  7. Remove the clutch cover.
  8.  
  9. Remove the clutch disc.

    Click image to see an enlarged view

    Fig. Exploded view of the clutch components.

  10.  

To install:

  1. Install the clutch disc on the flywheel.
  2.  
  3. Align the matchmarks on the clutch cover and flywheel.
  4.  
  5. Evenly tighten the mounting bolts in several steps to 14 ft. lbs. (19 Nm) by following the order shown.

    Click image to see an enlarged view

    Fig. Clutch cover torque sequence

  6.  
  7. Install or connect the following:

    Release fork
     
    Release bearing hub clip
     
    Release bearing assembly
     
    Release fork boot
     
    Transaxle
     

  8.  

 
label.common.footer.alt.autozoneLogo