Scion 2005-06

Ignition Coils

Print

Removal & Installation



1.5L Engine
  1. Disconnect the negative battery cable.
  2.  
  3. Remove cylinder head cover No. 2.
  4.  
  5. Remove the ignition coils (with igniter).
  6.  

To install:

  1. Install the ignition coil with igniter. Tighten the retainers to 80 inch lbs. (9 Nm).
  2.  
  3. Install the cylinder head cover No. 2.
  4.  
  5. Connect the negative battery cable.
  6.  

2.4L Engine
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the engine cover
  4.  
  5. Detach the 4 ignition coil connectors.

    Click image to see an enlarged view

    Fig. Detach the ignition coil electrical connectors

  6.  
  7. Remove the 4 bolts (one bolt for each coil), then remove the 4 ignition coils.

    Click image to see an enlarged view

    Fig. Each ignition coil is secured with one mounting bolt

  8.  

To install:

  1. Install the ignition coils and secure with the bolts. Tighten to 80 inch lbs. (9 Nm).
  2.  
  3. Attach the 4 ignition coil connectors.
  4.  
  5. Install the engine cover.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo