Sebring 2006

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. With the engine cold, partially drain the cooling system below the level of the Engine Coolant Temperature (ECT) sensor.
  4.  
  5. Disconnect the ECT sensor electrical connector.
  6.  
  7. Remove the ECT sensor.
  8.  

To install:

  1. Install the ECT sensor. Torque the sensor to 14 ft. lbs. (19 Nm).
  2.  
  3. Connect the ECT sensor electrical sensor.
  4.  
  5. Fill the cooling system to the proper level.
  6.  

 
label.common.footer.alt.autozoneLogo