Sebring 2006

Timing Belt Rear Cover

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the upper and lower front timing belt covers.
  4.  
  5. Remove the timing belt.
  6.  
  7. Remove the timing belt idler pulley.
  8.  
  9. Remove both camshaft sprockets. Hold the camshaft sprockets with Special Tool 6847 while removing the center bolts.
  10.  
  11. Remove the rear timing belt cover fasteners and remove the cover from the engine.

    Click image to see an enlarged view

    Fig. Remove the rear timing belt cover fasteners-2.4L engine

  12.  

To install:

  1. Install the rear timing belt cover and fasteners. Torque the fasteners to specified values

    The M6 Bolts: 106 inch lbs. (12 Nm)
     
    The M8 Bolts: 21 ft. lbs. (28 Nm)
     

  2.  
  3. Install the camshaft sprockets. Hold the camshaft sprockets with Special Tool 6847 while tightening the center bolts to 85 ft. lbs. (115 Nm).
  4.  
  5. Install the timing belt idler pulley.
  6.  
  7. Install the timing belt.
  8.  
  9. Install the upper and lower front timing belt covers.
  10.  

 
label.common.footer.alt.autozoneLogo