Sebring 2006

Coil Springs

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disassemble as follows:

    Remove the rear shock from the vehicle
     
    Install the assembly in a spring compressor tool
     
    Remove the jam nut, washer, and upper bushing
     
    Remove the upper bracket assembly and spring pad
     
    Remove the collar and bushing
     
    Remove the cup, bump rubber, and dust cover
     
    Remove the coil spring

    Click image to see an enlarged view

    Fig. Compress the coil spring as shown

     

  4.  

To assemble:

  1. Install the coil spring to the shock absorber using compressor Tools MB991237 and MB991239.
  2.  
  3. Install the dust cover and bump rubber.
  4.  
  5. Install the cup and bushing.
  6.  
  7. Install the collar, upper spring pad, and bracket assembly.
  8.  
  9. Install the upper bushing and washer.
  10.  
  11. When properly aligned, install the jam nut and torque to 17 ft. lbs. (23 Nm).
  12.  
  13. Remove the compressor tools and install the shock absorber.
  14.  

 
label.common.footer.alt.autozoneLogo