Sentra 1997

Alternator

Print

Removal & Installation



1.6L, 1.8L & 2.0L Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    2 lead wires and connector from the alternator
     
    Drive belt adjusting bolt, loosen only
     
    Drive belt
     
    Alternator
     

  4.  

To install:

  1. Install or connect the following:

    Alternator and retaining bolts loosely
     
    Belt and connect the wiring
     

  2.  
  3. Adjust the drive belt.
  4.  
  5. Torque the retaining bolts to 25 ft. lbs. (34 Nm).
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo