Sentra 1997

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Properly relieve fuel system pressure.
  4.  
  5. Remove or disconnect the following:
    WARNING
    Apply mating marks on fuel filter and fuel level sensor unit for proper alignment for installation.



    Negative battery cable
     
    Fuel pump assembly from fuel tank
     
    Fuel filter from fuel level sensor unit by gently releasing the tabs
     



    Fuel pressure regulator from the fuel filter by pulling off the retaining clip

    Click image to see an enlarged view

    Fig. Exploded view of the fuel level sensor unit and filter assembly-Sentra

     

  6.  

To install:

  1. Install or connect the following:

    New filter and secure the filter into the fuel level sensor unit
     
    Fuel level sensor unit into the fuel tank
     
    Negative battery cable
     

  2.  
  3. Start the vehicle, check for leaks and repair if necessary.
  4.  
  5. Install the inspection cover and the rear seat
  6.  

 
label.common.footer.alt.autozoneLogo