Sentra 1997

Brake Pads

Print

Removal & Installation





Click image to see an enlarged view

Fig. Rear disc brakes

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheels
     
    Parking brake cable bracket bolt
     
    Pin bolts and lift off the caliper body
     
    Pad springs and the pads and shims
     

  4.  

To install:

  1. Turn the piston clockwise back into the caliper body. Take care not to damage the piston boot.
  2.  
  3. Coat the pad contact area on the mounting support with a silicone based grease.
  4.  
  5. Install or connect the following:

    Pads, shims and retainer springs
     
    Caliper body into position in the mounting support and tighten the pin bolts to 28-38 ft. lbs. (38-52 Nm)
     
    Wheels and bleed the system if necessary.
     

  6.  

 
label.common.footer.alt.autozoneLogo