Sentra 1998

Release Lever & Bearing

Print

Removal & Installation





Click image to see an enlarged view

Fig. Clutch release mechanism



Click image to see an enlarged view

Fig. Driving out the spring pin



Click image to see an enlarged view

Fig. Lubrication points

  1. Remove the release bearing by pulling the retainers outward.
  2.  
  3. Align the spring pin with the cavity in the clutch housing and tap out the spring pin.
  4.  
  5. Check that the release bearing rolls freely and is not cracked, pitted or worn.
  6.  
  7. Check the release sleeve and withdrawal lever rubbing surface is not cracked, pitted or worn.
  8.  
  9. Apply lithium-based grease to the contact surface and rubbing surface as shown. Don't apply too much or it will contaminate the clutch disc.
  10.  

 
label.common.footer.alt.autozoneLogo