Sentra 2007

Accelerator Pedal

Print

Removal & Installation




NOTE
Do not disassemble accelerator pedal assembly. Do not remove accelerator pedal position sensor from accelerator pedal assembly.


NOTE
Avoid impact from dropping etc. during handling.


NOTE
Be careful to keep accelerator pedal assembly away from water.

  1. Disconnect the negative battery terminal.
  2.  
  3. Disconnect accelerator pedal position sensor harness connector.
  4.  
  5. Remove the accelerator pedal assembly nuts and remove accelerator pedal assembly.

    Click image to see an enlarged view

    Fig. Exploded view of the accelerator control system. Accelerator pedal assembly (1), locating pins (2), Arrow=Vehicle front

  6.  

To install:


NOTE
Do not disassemble accelerator pedal assembly. Do not remove accelerator pedal position sensor from accelerator pedal assembly.


NOTE
Avoid impact from dropping etc. during handling.


NOTE
Be careful to keep accelerator pedal assembly away from water.

  1. Install the accelerator pedal assembly nuts and install accelerator pedal assembly.
  2.  
  3. Connect accelerator pedal position sensor harness connector.
  4.  
  5. Connect the negative battery terminal.
    NOTE
    Check the accelerator pedal for smooth operation. There should be no binding or sticking when applying or releasing the accelerator pedal.


    NOTE
    Check that the accelerator pedal moves through the full specified distance of the specified pedal travel. Pedal travel 1.99 in (50.5 mm).


    NOTE
    When the accelerator pedal position sensor harness connector is disconnected, perform the -Accelerator Pedal Released Position Learning- procedure.



    Click image to see an enlarged view

    Fig. Check that the accelerator pedal moves through the full specified distance of the specified pedal travel. Pedal travel 1.99 in (50.5 mm) (A).

  6.  

 
label.common.footer.alt.autozoneLogo