Sentra 2007

G-Sensor

Print

Removal & Installation



  1. Remove center console. Refer to Consoles in the Body Section
  2.  
  3. Disconnect harness connector.
  4.  
  5. Remove attaching nuts and remove yaw rate/side/decel G sensor.
    WARNING
    Do not drop or strike the yaw rate/side/decel G sensor.


    CAUTION
    Do not use power tools to remove or install yaw rate/side/decel G sensor.



    Click image to see an enlarged view

    Fig. Remove attaching nuts and remove yaw rate/side/decel G sensor.

  6.  

To install:


WARNING
Do not drop or strike the yaw rate/side/decel G sensor.

  1. Install attaching nuts and install yaw rate/side/decel G sensor.
    1. Tighten the nuts to 62 inch lbs. (7 Nm).
    2.  

  2.  
  3. Connect harness connector.
  4.  
  5. Install center console. Refer to Consoles in the Body Section
  6.  

 
label.common.footer.alt.autozoneLogo