Sentra 2007

Removal & Installation

Print

  1. Remove the filter cover.
    1. Release the filter cover tab the pull the bottom of the filter cover out tilting it at an angle
    2.  
    3. Pull down the filter cover to disengage the hook at the top and remove the filter cover.

      Click image to see an enlarged view

      Fig. Release the filter cover tab (A) the pull the bottom of the filter cover out tilting it at an angle Pull down the filter cover to disengage the hook at the top and remove the filter cover.

    4.  

  2.  
  3. Remove the in-cabin microfilter.
  4.  

To install:

  1. Install the new in-cabin microfilter.
    NOTE
    Insert the new filter with the -UP- arrow in the correct orientation.


    NOTE
    Insert the new filter with the -UP- arrow side of the filter facing the front of the vehicle.

  2.  
  3. Install the filter cover.
    1. Insert the hook at the top of the filter cover into the heater and cooling unit case.
    2.  
    3. Swing the filter cover into the heater and cooling unit case until the filter cover tab (A) snaps securely on the heater and cooling unit case.
      NOTE
      Check the filter cover to make sure it is securely fastened to the heater and cooling unit case.

    4.  

  4.  

 
label.common.footer.alt.autozoneLogo