Sentra 2007

Removal & Installation

Print

  1. Release the CVT or M/T finisher, disconnect necessary connectors and remove finisher. Refer to Instrument Panel in the Body Section.
  2.  
  3. Release the clips using a suitable tool, disconnect harness, then remove the controller finisher.
  4.  
  5. Remove the five screws and remove the front air control from control finisher.

    Click image to see an enlarged view

    Fig. Release the clips using a suitable tool, disconnect harness, then remove the controller finisher. Remove the five screws (A) and remove the front air control (1)

  6.  

To install:

  1. Remove the five screws and remove the front air control from control finisher.
  2.  
  3. Release the clips using a suitable tool, disconnect harness, then remove the controller finisher.
  4.  
  5. Release the CVT or M/T finisher, disconnect necessary connectors and remove finisher. Refer to Instrument Panel in the Body Section.
  6.  

 
label.common.footer.alt.autozoneLogo