Sentra 2007

Removal & Installation

Print

Center Ventilator Grille RH/LH



Specific to:

Nissan Sentra 2007-2012

Release the tabs using a suitable tool and then remove the center ventilator grille.

To install:

Engage the tabs using a suitable tool and then install the center ventilator grille.

Defroster Nozzle



Specific to:

Nissan Sentra 2007-2012

  1. Remove the instrument panel assembly. Refer to Instrument Panel in the Body Section.
  2.  
  3. Remove the knee bolster.

    Click image to see an enlarged view

    Fig. Exploded view of the instrument panel assembly components

  4.  
  5. Remove the defroster nozzle.
  6.  

To install:

  1. Install the defroster nozzle.
  2.  
  3. Install the knee bolster.
  4.  
  5. Install the instrument panel assembly. Refer to Instrument Panel in the Body Section.
  6.  

Front Foot Duct LH



Specific to:

Nissan Sentra 2007-2012

  1. Remove the instrument lower finisher. Refer to Instrument Panel in the Body Section.
  2.  
  3. Remove the front foot duct.
  4.  

To install:

  1. Install the front foot duct.
  2.  
  3. Install the instrument lower finisher. Refer to Instrument Panel in the Body Section.
  4.  

Rear Floor Duct LH



Specific to:

Nissan Sentra 2007-2012

  1. Remove the floor carpet from the front floor area and remove the front floor spacer. Refer to Panels & Trim in the Body Section.
  2.  
  3. Remove the rear floor connector duct.
  4.  
  5. Remove the rear floor duct bolt.
  6.  
  7. Remove the rear floor duct.
  8.  

To install:

  1. Install the rear floor duct.
  2.  
  3. Install the rear floor duct bolt.
  4.  
  5. Install the rear floor connector duct.
  6.  
  7. Install the floor carpet to the front floor area and remove the front floor spacer. Refer to Panels & Trim in the Body Section.
  8.  

Rear Floor Connector Duct



Specific to:

Nissan Sentra 2007-2012

  1. Push up to disengage the rear floor connector duct from the rear floor duct (LH).
  2.  
  3. Remove the rear floor connector duct.
  4.  

To install:

  1. Install the rear floor connector duct.
  2.  
  3. Push down to engage the rear floor connector duct to the rear floor duct (LH).
  4.  

Front Foot Duct RH



Specific to:

Nissan Sentra 2007-2012

  1. Remove the glove box assembly. Refer to Glove Compartment in the Body Section.
  2.  
  3. Remove the front foot duct.
  4.  

To install:

  1. Install the front foot duct.
  2.  
  3. Install the glove box assembly. Refer to Glove Compartment in the Body Section.
  4.  

Rear Floor Duct RH



Specific to:

Nissan Sentra 2007-2012

  1. Remove the floor carpet from the front floor area and remove the front floor spacer. Refer to Panels & Trim in the Body Section.
  2.  
  3. Remove the rear floor duct bolt.
  4.  
  5. Remove the rear floor duct.
  6.  

To install:

  1. Install the floor carpet to the front floor area and install the front floor spacer. Refer to Panels & Trim in the Body Section.
  2.  
  3. Install the rear floor duct bolt.
  4.  
  5. Install the rear floor duct.
  6.  

Upper Defroster Grille



Specific to:

Nissan Sentra 2007-2012

  1. Pry from the rear (farthest from windshield) edge to release the tabs using a suitable tool.
  2.  
  3. Pry from the front (closest to windshield) edge to release the tabs using a suitable tool.
  4.  
  5. Remove the upper defroster grille.
  6.  

To install:

  1. Install the upper defroster grille.
  2.  
  3. Push from the front (closest to windshield) edge to engage the tabs using a suitable tool.
  4.  
  5. Push from the rear (farthest from windshield) edge to engage the tabs using a suitable tool.
  6.  

Side Defroster Duct RH/LH



Specific to:

Nissan Sentra 2007-2012

  1. Remove the instrument panel assembly. Refer to Instrument Panel in the Body Section.
  2.  
  3. Remove the knee bolster.

    Click image to see an enlarged view

    Fig. Exploded view of the instrument panel assembly components

  4.  
  5. Remove the defroster nozzle.
  6.  
  7. Remove the side defroster duct.
  8.  

To install:

  1. Install the side defroster duct.
  2.  
  3. Install the defroster nozzle.
  4.  
  5. Install the knee bolster.
  6.  
  7. Install the instrument panel assembly. Refer to Instrument Panel in the Body Section.
  8.  

Side Ventilator Grille RH/LH



Specific to:

Nissan Sentra 2007-2012

Release the tabs using a suitable tool and then remove the side ventilator grille.

To install:

Engage the tabs using a suitable tool and then remove the side ventilator grille.

Side Ventilator Duct RH/LH



Specific to:

Nissan Sentra 2007-2012

  1. Remove the instrument panel assembly. Refer to Instrument Panel in the Body Section.
  2.  
  3. Remove the knee bolster.

    Click image to see an enlarged view

    Fig. Exploded view of the instrument panel assembly components

  4.  
  5. Remove the defroster nozzle.
  6.  
  7. Remove the side ventilator duct.
  8.  

To install:

  1. Install the side ventilator duct.
  2.  
  3. Install the defroster nozzle.
  4.  
  5. Install the knee bolster.
  6.  
  7. Install the instrument panel assembly. Refer to Instrument Panel in the Body Section.
  8.  

Side Defroster Grille RH/LH



Specific to:

Nissan Sentra 2007-2012

Release the tabs using a suitable tool and then remove the side defroster grille.

To install:

Engage the tabs using a suitable tool and then remove the side defroster grille.

 
label.common.footer.alt.autozoneLogo