Sentra 2007

Removal & Installation

Print

  1. Remove the instrument lower cover (RH). Refer to Instrument Panel in the Body Section.
  2.  
  3. Remove the glove box. Refer to Glove Compartment in the Body Section
  4.  
  5. Remove the evaporator cover.
  6.  
  7. Remove the evaporator.

    Click image to see an enlarged view

    Fig. Remove the evaporator cover (1). Remove the evaporator (2).

  8.  

To install:


NOTE
Replace the O-rings with new ones, then apply compressor oil to them when installing them.

  1. Install the evaporator.
  2.  
  3. Install the evaporator cover.
  4.  
  5. Install the glove box. Refer to Glove Compartment in the Body Section
  6.  
  7. Install the instrument lower cover (RH). Refer to Instrument Panel in the Body Section.
  8.  

 
label.common.footer.alt.autozoneLogo