Sentra 2007

Mudguards

Print

Removal & Installation



  1. Remove the screws and mudguard front, if equipped.
  2.  
  3. Remove the screws and mudguard rear, if equipped.
  4.  
  5. Remove the clips and screws, then remove mudguard center from body outer sill reinforcement.
  6.  
  7. Remove the screws and mudguard center bracket rear.
  8.  
  9. Using a suitable tool, carefully lift the mudguard center away from the adhesive backed foam tape.
  10.  
  11. Release the adhesive backed foam tape from the body surface.

    Click image to see an enlarged view

    Fig. Exploded view of the mudguard components

  12.  

To install:


NOTE
Before installing mudguard center, clean the surface where it will be mounted with isopropyl alcohol or equivalent to degrease the surface.


NOTE
Before installing, be sure there are no gaps or waves in the adhesive backed foam tape where the surfaces meet.

  1. Install the adhesive backed foam tape to the body surface.
  2.  
  3. Using a suitable tool, carefully place the mudguard center to the adhesive backed foam tape.
  4.  
  5. Install the screws and mudguard center bracket rear.
  6.  
  7. Install the clips and screws, then install mudguard center to body outer sill reinforcement.
  8.  
  9. Install the screws and mudguard rear, if equipped.
  10.  
  11. Install the screws and mudguard front, if equipped.
  12.  

 
label.common.footer.alt.autozoneLogo