Sentra 2007

Shock Absorbers

Print

Removal & Installation



  1. Set jack under rear suspension beam.
  2.  
  3. Remove upper shock absorber bolt.

    Click image to see an enlarged view

    Fig. Remove upper shock absorber bolt (A).

  4.  
  5. Remove shock absorber lower bolt.

    Click image to see an enlarged view

    Fig. Remove shock absorber lower bolt (A)

  6.  
  7. Remove the shock absorber from vehicle.

    Click image to see an enlarged view

    Fig. Exploded view of the rear suspension assembly

  8.  

Inspection After Removal

  1. Check the following:
    1. Shock absorber for deformation, cracks or damage, and replace if necessary.
    2.  
    3. Piston rod for damage, uneven wear or distortion, and replace if necessary.
    4.  

  2.  

To install:

  1. Install the shock absorber to vehicle.
  2.  
  3. Install shock absorber lower bolt.
  4.  
  5. Install upper shock absorber bolt.
  6.  
  7. Remove jack from under rear suspension beam.
  8.  

 
label.common.footer.alt.autozoneLogo