Sentra 2007

Description & Operation

Print

With Navigation



Specific to:

Nissan Sentra 2007-2012

Bluetooth®Hands-Free Phone System

  1. Refer to the Owner's Manual for Bluetooth telephone system operating instructions.
    NOTE
    Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth telephone system.

  2.  
  3. Bluetooth telephone system allows users who have a Bluetooth cellular telephone to make a wireless connection between their cellular telephone and the Bluetooth control unit. Hands-free cellular telephone calls can be sent and received. Some Bluetooth cellular telephones may not be recognized by the Bluetooth control unit.
  4.  
  5. When a cellular telephone or the Bluetooth control unit is replaced, the telephone must be paired with the Bluetooth control unit. Different cellular telephones may have different pairing procedures. Refer to the cellular telephone operating manual.

    Click image to see an enlarged view

    Fig. Bluetooth®Hands-Free Phone System

  6.  

Bluetooth Control Unit

  1. When the ignition switch is turned to ACC or ON, the Bluetooth control unit will power up. During power up, the Bluetooth control unit is initialized and performs various self-checks. Initialization may take up to 20 seconds. If a phone is present in the vehicle and paired with the Bluetooth control unit, Nissan Voice Recognition will then become active. Bluetooth telephone functions can be turned off using the Nissan Voice Recognition system.

    Click image to see an enlarged view

    Fig. Bluetooth Control Unit

  2.  

Steering Wheel Audio Control Switches

  1. When buttons on the steering wheel audio control switch are pushed, the resistance in steering wheel audio control switch circuit changes depending on which button is pushed. The Bluetooth control module uses this signal to perform various functions while navigating through the voice recognition system.
  2.  
  3. The following functions can be performed using the steering wheel audio control switch:

    Initiate Self-Diagnosis of the Bluetooth telephone system
     
    Start a voice recognition session
     
    Answer and end telephone calls
     
    Adjust the volume of calls

    Click image to see an enlarged view

    Fig. Steering Wheel Audio Control Switches

     

  4.  

Volume Switch

  1. Call volume can be adjusted using the AV control unit volume switch.

    Click image to see an enlarged view

    Fig. Volume Switch

  2.  

Bluetooth Microphone

  1. The Bluetooth microphone is located in the roof console assembly.
  2.  
  3. The Bluetooth microphone sends a signal to the Bluetooth control unit. The Bluetooth microphone can be actively tested during self-diagnosis.

    Click image to see an enlarged view

    Fig. Bluetooth Microphone

  4.  

AV Control Unit (with premium system)

  1. The AV control unit receives signals from the Bluetooth control unit and sends audio signals to the speakers.

    Click image to see an enlarged view

    Fig. AV Control Unit (with premium system)

  2.  

Without Navigation



Specific to:

Nissan Sentra 2007-2012

Bluetooth® Hands-Free Phone System

  1. Refer to the Owner's Manual for Bluetooth telephone system operating instructions.
    NOTE
    Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth telephone system.

  2.  
  3. Bluetooth telephone system allows users who have a Bluetooth cellular telephone to make a wireless connection between their cellular telephone and the Bluetooth control unit. Hands-free cellular telephone calls can be sent and received. Some Bluetooth cellular telephones may not be recognized by the Bluetooth control unit.
  4.  
  5. When a cellular telephone or the Bluetooth control unit is replaced, the telephone must be paired with the Bluetooth control unit. Different cellular telephones may have different pairing procedures. Refer to the cellular telephone operating manual.

    Click image to see an enlarged view

    Fig. Bluetooth®Hands-Free Phone System

  6.  

Bluetooth Control Unit

  1. When the ignition switch is turned to ACC or ON, the Bluetooth control unit will power up. During power up, the Bluetooth control unit is initialized and performs various self-checks. Initialization may take up to 20 seconds. If a phone is present in the vehicle and paired with the Bluetooth control unit, Nissan Voice Recognition will then become active. Bluetooth telephone functions can be turned off using the Nissan Voice Recognition system.

    Click image to see an enlarged view

    Fig. Bluetooth Control Unit

  2.  

Steering Wheel Audio Control Switches

  1. When buttons on the steering wheel audio control switch are pushed, the resistance in steering wheel audio control switch circuit changes depending on which button is pushed. The Bluetooth control module uses this signal to perform various functions while navigating through the voice recognition system.
  2.  
  3. The following functions can be performed using the steering wheel audio control switch:

    Initiate Self-Diagnosis of the Bluetooth telephone system
     
    Start a voice recognition session
     
    Answer and end telephone calls
     
    Adjust the volume of calls

    Click image to see an enlarged view

    Fig. Steering Wheel Audio Control Switches

     

  4.  

Volume Switch (with mid system)

  1. Call volume can be adjusted using the audio unit volume switch.

    Click image to see an enlarged view

    Fig. Volume Switch (with mid system)

  2.  

Volume Switch (with premium system)

  1. Call volume can be adjusted using the AV control unit volume switch.

    Click image to see an enlarged view

    Fig. Volume Switch (with premium system)

  2.  

Bluetooth Microphone

  1. The Bluetooth microphone is located in the roof console assembly.
  2.  
  3. The Bluetooth microphone sends a signal to the Bluetooth control unit. The Bluetooth microphone can be actively tested during self-diagnosis.

    Click image to see an enlarged view

    Fig. Bluetooth Microphone

  4.  

Audio Unit (with mid system)

  1. The audio unit receives signals from the Bluetooth control unit and sends audio signals to the speakers.

    Click image to see an enlarged view

    Fig. Audio Unit (with mid system)

  2.  

AV Control Unit (with premium system)

  1. The AV control unit receives signals from the Bluetooth control unit and sends audio signals to the speakers.

    Click image to see an enlarged view

    Fig. AV Control Unit (with premium system)

  2.  

 
label.common.footer.alt.autozoneLogo