Sentra 2007

Windshield Washer Systems

Print

Removal & Installation



Washer Fluid Reservoir

Specific to:

Nissan Sentra 2007-2012

  1. Remove the washer fluid reservoir screw.

    Click image to see an enlarged view

    Fig. Remove the washer fluid reservoir screw (A)

  2.  
  3. Position aside the front fender protector RH. Refer to Bumpers in the Body Section.
  4.  
  5. Detach the fog lamp harness clips and remove the washer tube.
  6.  
  7. Disconnect the washer motor connector.
  8.  
  9. Remove the washer fluid reservoir screws, and remove washer reservoir.

    Click image to see an enlarged view

    Fig. Detach the fog lamp harness clips (A) and remove the washer tube (1). Disconnect the washer motor connector (C). Remove the washer fluid reservoir screws (B), and remove washer reservoir (2).

  10.  

To install:

  1. Install the washer fluid reservoir screws, and install washer reservoir.
  2.  
  3. Connect the washer motor connector.
  4.  
  5. Attach the fog lamp harness clips and install the washer tube.
  6.  
  7. Reposition the front fender protector RH. Refer to Bumpers in the Body Section.
  8.  
  9. Install the washer fluid reservoir screw.
  10.  

Washer Nozzles

Specific to:

Nissan Sentra 2007-2012

  1. Remove cowl top cover. Refer to Fenders & Body Panels in the Body Section.
  2.  
  3. Remove washer tube.
  4.  
  5. While pressing pawl on the reverse side of front washer nozzle, remove front washer nozzle from cowl top cover.

    Click image to see an enlarged view

    Fig. While pressing pawl (A) on the reverse side of front washer nozzle (1), remove front washer nozzle (1) from cowl top cover

  6.  

To install:

  1. While pressing pawl on the reverse side of front washer nozzle, install front washer nozzle to cowl top cover.
  2.  
  3. Install washer tube.
  4.  
  5. Install cowl top cover. Refer to Fenders & Body Panels in the Body Section.
  6.  

Washer Motor

Specific to:

Nissan Sentra 2007-2012

  1. Position aside the front fender protector RH. Refer to Bumpers in the Body Section.
  2.  
  3. Disconnect washer motor connector and detach the washer tube.
  4.  
  5. Pull out washer motor in the direction shown. Remove the washer motor from washer fluid reservoir.

    Click image to see an enlarged view

    Fig. Disconnect washer motor connector (1) and detach the washer tube (A). Pull out washer motor (2) in the direction shown. Remove the washer motor (2) from washer fluid reservoir.

  6.  

To install:

  1. Pull out washer motor in the direction shown. Remove the washer motor from washer fluid reservoir.
  2.  
  3. Disconnect washer motor connector and detach the washer tube.
  4.  
  5. Position aside the front fender protector RH. Refer to Bumpers in the Body Section.
  6.  

 
label.common.footer.alt.autozoneLogo