Sentra 2008

Ignition Coil(s)

Print

Removal & Installation



2.0L Engine

Specific to:

Nissan Sentra 2007-2012

  1. Remove the intake manifold. Refer to Intake Manifold in the Engine Mechanical Section.
  2.  
  3. Remove the four ignition coils.
    NOTE
    Handle it carefully and avoid impacts.


    NOTE
    Never disassemble.



    Click image to see an enlarged view

    Fig. Exploded view of the ignition coil, spark plug, and rocker cover components

  4.  

To install:


NOTE
Handle it carefully and avoid impacts.


NOTE
Never disassemble.

  1. Install the four ignition coils.
  2.  
  3. Install the intake manifold. Refer to Intake Manifold in the Engine Mechanical Section.
  4.  

2.5L Engine

Specific to:

Nissan Sentra 2007-2012

  1. Remove the engine room cover.
  2.  
  3. Remove resonator. Refer to Air Intake System in the Engine Mechanical Section.
  4.  
  5. Disconnect the harness connector from the ignition coil.
  6.  
  7. Remove the ignition coil.
    NOTE
    Do not drop or shock it.



    Click image to see an enlarged view

    Fig. Exploded view of the ignition coil (1), Spark plug (2), Rocker cover (3)-2.5L engine

  8.  

To install:


NOTE
Do not drop or shock it.

  1. Install the ignition coil.
  2.  
  3. Connect the harness connector to the ignition coil.
  4.  
  5. Install resonator. Refer to Air Intake System in the Engine Mechanical Section.
  6.  
  7. Install the engine room cover.
  8.  

 
label.common.footer.alt.autozoneLogo