Sentra 2008

Speakers

Print

Removal & Installation



Door Mounted

Specific to:

Nissan Sentra 2007-2012

  1. Remove the front door finisher. Refer to Panels & Trim in the Body Section.
  2.  
  3. Remove the front door speaker screws, disconnect the front door speaker connector and remove the front door speaker.

    Click image to see an enlarged view

    Fig. Remove the front door speaker screws (A), disconnect the front door speaker connector and remove the front door speaker (1).

  4.  

To install:

  1. Install the front door speaker screws, connect the front door speaker connector and install the front door speaker.
  2.  
  3. Install the front door finisher. Refer to Panels & Trim in the Body Section.
  4.  

Rear

Specific to:

Nissan Sentra 2007-2012

  1. Remove the rear parcel shelf finisher. Refer to Rear Parcel Shelf Finisher in the Panels & Trim Section.
  2.  
  3. Remove the rear speaker screws, disconnect the rear speaker connector and remove the rear speaker.

    Click image to see an enlarged view

    Fig. Remove the rear speaker screws (A), disconnect the rear speaker connector and remove the rear speaker (1).

  4.  

To install:

  1. Install the rear speaker screws, connect the rear speaker connector and install the rear speaker.
  2.  
  3. Install the rear parcel shelf finisher. Refer to Rear Parcel Shelf Finisher in the Panels & Trim Section.
  4.  

Dash Mounted

Specific to:

Nissan Sentra 2007-2012

  1. Remove the front pillar garnish. Refer to Panels & Trim in the Body Section.
  2.  
  3. Remove the front tweeter grille.
  4.  
  5. Remove the front tweeter screws, disconnect the front tweeter connector and remove the front tweeter.

    Click image to see an enlarged view

    Fig. Remove the front tweeter screws (A), disconnect the front tweeter connector and remove the front tweeter (1).

  6.  

To install:

  1. Install the front tweeter screws, connect the front tweeter connector and install the front tweeter.
  2.  
  3. Install the front tweeter grille.
  4.  
  5. Install the front pillar garnish. Refer to Panels & Trim in the Body Section.
  6.  

 
label.common.footer.alt.autozoneLogo