Sentra 2008

Removal & Installation

Print

  1. Remove the instrument lower finisher. Refer to Instrument Panel in the Body Section.
  2.  
  3. Remove the front foot duct (LH). Refer to Ducts And Grilles in the Heating, Ventilation, & Air Conditioning Section.
  4.  
  5. Remove the accelerator pedal. Refer to Acceleration Control in the Fuel Systems Section.
  6.  
  7. Disconnect the fan control amplifier connector.
  8.  
  9. Remove the two screws from the fan control amplifier and then remove the fan control amplifier.

    Click image to see an enlarged view

    Fig. Disconnect the fan control amplifier connector (B). Remove the two screws (A) from the fan control amplifier (1) and then remove the fan control amplifier (1).

  10.  

To install:

  1. Remove the two screws from the fan control amplifier and then remove the fan control amplifier.
  2.  
  3. Disconnect the fan control amplifier connector.
  4.  
  5. Remove the accelerator pedal. Refer to Acceleration Control in the Fuel Systems Section.
  6.  
  7. Remove the front foot duct (LH). Refer to Ducts And Grilles in the Heating, Ventilation, & Air Conditioning Section.
  8.  
  9. Remove the instrument lower finisher. Refer to Instrument Panel in the Body Section.
  10.  

 
label.common.footer.alt.autozoneLogo