Sentra 2008

Removal & Installation

Print

  1. Remove the instrument panel assembly. Refer to Instrument Panel in the Body Section.
  2.  
  3. Remove the accelerator pedal. Refer to Acceleration Control in the Fuel Systems Section.
  4.  
  5. Disconnect the intake door motor connector.
  6.  
  7. Remove the screws and then the intake door motor from the heater and cooling unit assembly.

    Click image to see an enlarged view

    Fig. Disconnect the intake door motor connector (B). Remove the screws (A) and then the intake door motor (1) from the heater and cooling unit assembly.

  8.  

To install:

  1. Install the screws and then the intake door motor to the heater and cooling unit assembly.
  2.  
  3. Connect the intake door motor connector.
  4.  
  5. Install the accelerator pedal. Refer to Acceleration Control in the Fuel Systems Section.
  6.  
  7. Install the instrument panel assembly. Refer to Instrument Panel in the Body Section.
  8.  

 
label.common.footer.alt.autozoneLogo