Sentra 2008

Glove Compartment

Print

Removal & Installation



  1. Remove cluster lid C. Refer to Instrument Panel in the Body Section.
  2.  
  3. Remove the instrument panel trim (RH).
  4.  
  5. Remove glove box lower finisher screws, remove glove box lower finisher.

    Click image to see an enlarged view

    Fig. Remove glove box lower finisher screws (A), remove glove box lower finisher (1)

  6.  
  7. Remove the glove box assembly:
    1. Remove the two lower glove box assembly screws.
    2.  
    3. Open the glove box and remove the four upper glove box assembly screws.

      Click image to see an enlarged view

      Fig. Remove the two lower glove box assembly screws (A). Open the glove box and remove the four upper glove box assembly screws (B).

    4.  

  8.  

To install:

  1. Install the glove box assembly:
    1. Open the glove box and install the four upper glove box assembly screws.
    2.  
    3. Install the two lower glove box assembly screws.
    4.  

  2.  
  3. Install glove box lower finisher screws, install glove box lower finisher.
  4.  
  5. Install the instrument panel trim (RH).
  6.  
  7. Install cluster lid C. Refer to Instrument Panel in the Body Section.
  8.  

 
label.common.footer.alt.autozoneLogo