Sentra 2008

Axle Stub Shaft Bearing & Seal

Print

Removal & Installation




NOTE
No parts are serviceable. The hub, bearing and seal are all replaced as one assembly.

  1. Raise and safely support the vehicle and remove the brake assembly.
  2.  
  3. Remove the bolts to remove wheel hub assembly from knuckle.
  4.  
  5. Installation is the reverse of removal. Torque the hub bolts to 65 ft. lbs. (88 Nm).
  6.  
  7. Check that the wheel bearings operate smoothly. Maximum end play is 0.002 in. (0.05 mm).
  8.  

 
label.common.footer.alt.autozoneLogo