Sentra 2008

Wheel Hub & Bearing

Print

Removal & Installation



  1. Raise and safely support the vehicle and remove the rear wheel.
  2.  
  3. Remove brake drum.
  4.  
  5. Remove the rear ABS sensor, then move it away from the wheel hub assembly.
    WARNING
    Failure to remove the ABS sensor may result in damage to the sensor wires and the sensor being inoperative.

  6.  
  7. Remove the wheel hub assembly.
  8.  
  9. Installation is the reverse of removal. Torque the hub bolts to 65 ft. lbs. (88 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo