Sienna 1998-1999

Malfunction Indicator Light

Print

Resetting



  1. Connect an OBD II scan tool to the diagnostic connector (DLC3).
  2.  
  3. Turn the ignition switch to ON.
  4.  
  5. Turn the tester or scan tool ON
  6.  
  7. Check whether any DTCs have been stored . Note them down if necessary.
  8.  
  9. Clear DTCs.
  10.  
  11. The MIL should turn off.
  12.  

 
label.common.footer.alt.autozoneLogo