Sienna 1998-1999

Lower Ball Joints

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Steering knuckle with the axle hub
     
    Dust deflector, by prying it from the knuckle
     
    Cotter pin and nut from the ball joint
     
    Ball joint from the steering knuckle, by removing the 2 bolts
     
    Lower ball joint, using a Ball Joint Separator tool 09628-62011
     

  4.  

To install:

  1. Install or connect the following:

    Lower ball joint. Tighten the nut to 76 ft. lbs. (103 Nm) and both bolts to 94 ft. lbs. (127 Nm).
     
    New cotter pin
     
    Wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo