Sienna 1998-1999

Shock Absorbers

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Support the axle beam with jacks.
  4.  
  5. Remove or disconnect the following:

    Rear wheels
     
    Interior service covers to access the upper shock mounts
     
    Both nuts and retainers from the upper mount
     
    Shock absorber
     

  6.  

To install:

  1. Install the shock absorber. Tighten the lower mounting bolt to 27 ft. lbs. (37 Nm).
  2.  
  3. If the upper cushion is showing signs of wear, replace it.
  4.  
  5. Install or connect the following:

    Upper shock absorber. Tighten the nuts to 18 ft. lbs. (25 Nm).
     
    Wheels
     

  6.  

 
label.common.footer.alt.autozoneLogo