Sienna 1998-1999

Ignition Switch

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Insert the key into the ignition key cylinder and release the steering lock.
  6.  
  7. Remove the steering column cover screws.

    Click image to see an enlarged view

    Fig. Steering column covers

  8.  
  9. Detach the 4 claws, and remove the steering column cover lower.
  10.  
  11. Disconnect the ignition switch connector.
  12.  
  13. Remove the 2 screws and ignition switch.

    Click image to see an enlarged view

    Fig. Ignition switch components

  14.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo